For the purpose of helping to sanitize your Canon Camera, Lens and Video products, it is recommended that you clean parts touched with the hands such as camera grips, dials and lens exteriors.

1. Turn off the device and remove the battery before cleaning.
2. Please use a pre-moistened cloth or wet a soft cloth with 70% to 80% diluted ethanol or isopropyl alcohol to help sanitize and clean your Canon products. Lint-free or microfiber cloths are recommended. It is recommended that you use and properly dispose of protective disposable rubber gloves.
3. Refrain from spraying cleaning agent-directly on the product. Instead, spray the cleaning agent onto a lint-free or microfiber cloth and then wipe the exterior surfaces.
4. Do not use 70% to 80% diluted ethanol or isopropyl alcohol to clean image sensors or coated lens surfaces.
5. Do not use cleaners that contain volatile solvents such as paint thinners or benzene to clean Canon camera, lens, and video products.

For the purpose of helping to sanitize your Broadcast and Cinema Lens products it is recommended that you clean parts touched with the hands frequently such as Drive Units (servo grips), Z/F/I rings, button/switches, LCD screens, dials, and lens exteriors.

1. Turn off the camera and remove the battery before cleaning.
2. Please use a pre-moistened cloth or wet a soft cloth with 70% to 80% diluted ethanol or isopropyl alcohol to help sanitize and clean your Canon product. Lint-free or microfiber cloths are recommended. It is recommended that you use and properly dispose of protective disposable rubber gloves.
3. Refrain from spraying alcohol directly on the product. Instead, spray the cleaning agent onto a lint-free or microfiber cloth and then wipe the exterior surfaces.
4. Do not use alcohol to clean coated lens surfaces (e.g., optical front and rear glass).
5. For optical front and rear glass cleaning, apply a small amount of commercially available lens cleaner to lens-tissue and/or cleaning paper first. With a moist lens cleaning paper, gently swirl over the lens surface, starting at the center area of the lens and circling gradually outward until whole lens surface has been covered. (Never spray lens cleaner directly on the lens surface)
6. Do not use cleaners that contain volatile solvents such as paint thinners or benzene to clean cameras and lenses.

For the purpose of helping to sanitize your Canon PIXMA, MAXIFY, WG-Series and Finetech Printers as well as CanoScan Scanners, it is recommended that you clean parts touched with the hands such as exterior operation panel and buttons,touch screen, scanner cover and platen glass.

1. Turn off the device and unplug it from the power source (also remove the battery for mobile printers) before cleaning. Wait until surfaces are dry before powering the device back on.
2. Please use a pre-moistened cloth or wet a soft cloth with 70% to 80% diluted ethanol or isopropyl alcohol to help sanitize and clean your Canon Printer or Scanner.
   Lint-free or microfiber cloths are recommended. It is recommended that you use and properly dispose of protective disposable rubber gloves.
3. Refrain from spraying cleaning agent directly on the product. Instead, spray the cleaning agent onto a lint-free or microfiber cloth and then wipe the exterior surfaces.
4. Utilize glass cleaner only on the platen glass surface. Wipe with a lint-free cloth.
5. Do not use cleaners that contain volatile solvents such as paint thinners or benzene to clean Canon Printers or Scanners.

For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:

1. Make sure the device is powered down and unplugged before cleaning. Wait until surfaces are dry before plugging in and powering the device back on.
2. Please use a soft cloth moistened with ethanol or isopropyl alcohol of at least 70% concentration to help sanitize and clean your Canon imageCLASS products.
   Lint-free or microfiber cloths are recommended. It is recommended that you use and properly dispose of protective disposable rubber gloves.
   Refrain from spraying cleaning agent-directly on the product. Instead, spray the cleaning agent onto a lint-free or microfiber cloth and then wipe the exterior surfaces.
3. Use only glass cleaner on the platen glass.
4. Do not use cleaners that contain volatile solvents such as paint thinners or benzene to clean Canon imageCLASS printer products.